A makerspace in South Orlando
For the past six years at Maker Faire Orlando, members of FamiLab have taught attendees how to solder with a cool little Makey pin with 2 self-flashing LEDs. We’ve been asked for more advanced soldering training, and we responded with the addition of a PIC-microcontroller-based board twinkling several LEDs, and with a switch that can beContinue Reading Advanced soldering training at Maker Faire Orlando 2017
Table Saw Mobile Base This past week I decided that the Craftsman table saw that was donated to MakerFX needed a new stand so the saw would be at the same height as the big work bench. We received the saw mounted onto some form of network rack with wheels, the saw was aboutContinue Reading Shop Projects: Table Saw Stand and Miter Saw Station
Use your maker skills to get prepared for the upcoming 2017 solar Eclipse!
Slicing is the process of taking a model – usually a STL file – and creating commands a 3D printer uses to actually extrude plastic to print the model. There are many different slicing programs available. Some are free and some are paid. Simplify3D is in the paid category and if you can spring forContinue Reading Simplify3D – 7 New Features
At MakerFX, we use the equipment and tools we have to enhance our workspace. We had a need for signage to clarify policies for certain areas and tools. A member used two tools to make the sign below. He used the Epilog Laser to cut a piece of acrylic to size. He then used theContinue Reading DIY Signage
The first workbench for the MakerFX Shop has been completed this past week and it was a blast to build. A few members did research and settled upon a work bench design by Ron Paulk (link to plans: http://www.paulkhomes.com/order-plans.html) Normally the workbench breaks down into multiple, easily transportable to job sites, but for the shop itContinue Reading Paulk Style Workbench for the Woodshop Zone @ MakerFX
It’s awesome having a 3d printer manufacturer in Orlando. We now have 5 DeltaMaker 3D printers available for use thanks to their generous support. These printers are available for use by members and are used during our 3D printing classes. If you would like to learn about 3D printing, you can get started with ourContinue Reading DeltaMaker Printers at MakerFX
Before installing the electronics, I want to get you a sneak peek of the fully assembled OpenRC Formula 1 car. Below are the main body parts assembled before being attached to the chassis. The helmet on the main body cover was another Thingiverse creation. This is the fully assembled car less the motor and electronics.Continue Reading OpenRC Formula 1 Car – Full Assembly Preview
Ok time for assembly of the 45 printed parts. The rear drivetrain and spoiler are the first step. Other than the M3 hardware, there are 6 bearings that are required. Two of the bearings are in the rear drivetrain. The full chassis is printed in 2 parts. This is a top view of the 2Continue Reading OpenRC Formula 1 Car – Rolling Chassis
I have decided to build the OpenRC Formula 1 Car as my first 3d printing project. I have finished printing all the parts for my first car. I say first because I suspect there will be multiple cars made in 2017. There are 45 printed parts in this build from Thingiverse. Everything except the tires are printed in PLA.Continue Reading OpenRC Formula 1 Car – Parts Printed